Enhanced mechanical toughness of carbon nanofibrous-coated surface modified Kevlar reinforced polyurethane/epoxy matrix hybrid composites

High-performance Kevlar fiber had extensively been explored to upgraded mechanical properties of the advanced composites. Therefore, this study aimed a challenging work to grow carbon nanofibers onto the Kevlar fiber to improve its fiber-matrix interaction properties. It was successfully done through inexpensive flame deposition as well as modification of matrix with hybrid resin using polyurethane-epoxy mixture. A hand-layup method had been adopted to manufacture the composite laminates. The chemical and surface structures of the prepared laminae were examined by scanning electron microscopy, Raman spectroscopy, X-ray diffraction, and the composite's properties were evaluated tensile test, compact tension (CT) fracture test, fractography, and differential scanning calorimetry. The surface modified Kevlar laminae with CNF were used as reinforcing layer in the epoxy and PU/epoxy hybrid resin matrices. CNF-coated heated Kevlar reinforced laminated PU/epoxy hybrid composites (CNF-Kev/PU-Epoxy) showed highest elongation 47% and fracture toughness (11.7 MPa√m) along with good UTS 139 MPa. Therefore, these hybrid nanocomposites developed by simple inexpensive method would be the potential candidates for several advanced applications particularly in defense, automobile, aerospace, and spacecraft applications. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48802.     

Palynological investigation of some selected species of family Fabaceae from Pakistan,using light and scanning electron microscopy techniques

Pollen morphology of 11 species of family Fabaceae that is, Trifolium alexandrinum, Trifolium resupinatum, Arachis hypogaea, Lathyrus aphaca, Medicago lupulina, Vicia sativa, Lathyrus odoratus, Pongamia pinnata, Melilotus indicus, Medicago polymorpha, Medicago sativa from Pakistan has been investigated by light and scanning electron microscopy. Pollen were generally tricolporate, radially symmetrical, isopolar, elliptic in equatorial view and triangular in polar view under LM. Results showed that pollens were per‐prolate (T. alexandrinum), prolate (T. resupinatum, V. sativa, L. odoratus, Melilotus indicus, M. polymorpha, M. sativa) and sub‐prolate (A. hypogaea, L. aphaca, M. lupulina, P. pinnata). The larger polar/equatorial (P/E) ratio was found in T. alexandrinum (2.26 μm) and the smallest was found in M. lupulina (1.21 μm). The exine of T. resupinatum was 3.00 μm in thickness while others posses smaller exine thickness. The larger pore diameter was found in P. pinnata (16.01 μm) while others have smaller. The length of colpi was larger in Arachis hypogaea (32.24) while others posses smaller. Eight types of surface ornamentation (Psilate, faintly rugulate). Perforate and rugulate to verrucate have been observed under SEM. The pollens were europalynous type. Pollen morphology proved to be useful for the specific delimitation and serve as a tool for the identification and classification of taxa at specific and generic levels and can also be used as a key for the taxonomic features. Diversity in exine sculpture is helpful indicative characters for the isolation of closely related species. Hence, it is clear that both qualitative and quantitative characters of pollen can be useful for differentiating between taxa at specific level.     

A Potent Mimetic of the Siglec-8 Ligand 6’-Sulfo-Sialyl Lewisx

Siglecs are members of the immunoglobulin gene family containing sialic acid binding N-terminal domains. Among them, Siglec-8 is expressed on various cell types of the immune system such as eosinophils, mast cells and weakly on basophils. Cross-linking of Siglec-8 with monoclonal antibodies triggers apoptosis in eosinophils and inhibits degranulation of mast cells, making Siglec-8 a promising target for the treatment of eosinophil- and mast cell-associated diseases such as asthma. The tetrasaccharide 6’-sulfo-sialyl Lewis^x has been identified as a specific Siglec-8 ligand in glycan array screening. Here, we describe an extended study enlightening the pharmacophores of 6’-sulfo-sialyl Lewis^x and the successful development of a high-affinity mimetic. Retaining the neuraminic acid core, the introduction of a carbocyclic mimetic of the Gal moiety and a sulfonamide substituent in the 9-position gave a 20-fold improved binding affinity. Finally, the residence time, which usually is the Achilles tendon of carbohydrate/lectin interactions, could be improved.     

远程控制超声扫描的远端操纵系统

针对远程超声扫描,研制了一种远端操纵系统,并实现了超声探头的人机协作控制。探头控制中利用远端操纵系统网传信号实时复现远端操作员的扫描动作,并在此基础上利用阻抗控制方式自动控制探头对皮肤的压力。实验结果表明:近端超声探头的位置误差和姿态误差分别保持在±2.0 mm和±1.5°以内,能较好地复现操作员的扫描动作;探头压力跟踪误差稳定在±0.5 N的范围内,不但能将操作员的扫描手感真实地施加到皮肤上来提升其临场感,而且为进一步提高超声图像的质量,增强超声扫描的安全性提供了参考。     

Synthesis and two-step sintering behavior of solution derived corundum abrasives with plate-like grains

Corundum abrasives with plate-like grains were fabricated by a two-step sintering technique using the solution-based process with the addition of the ternary compound additive Na₃AlF₆-CaO-SiO₂. The two-step sintering method showed obvious advantages over conventional sintering methods in promoting sample densification, suppressing grain growth, and homogenizing the microstructure of the corundum abrasives. The sample doped with 2.5?wt% Na₃AlF₆ and 4?wt% CaO + SiO₂ in the molar ratio of 1:1 possessed a relative density of 99.3%, average grain size of 0.54?µm, and single-particle compressive strength of 49?N. The introduction of seeds reduced the temperature of θ- to α-Al₂O₃ phase transformation. The relationship between the microstructure and the mechanical properties of the abrasives was also discussed.     

Mullite-bonded SiC-whisker-reinforced SiC matrix composites: Preparation,characterization, and toughening mechanisms

A novel mullite-bonded SiC-whisker-reinforced SiC matrix composite (SiCw/SiC, SiC whisker-to-SiC powder mass ratio of 1:9) was designed and successfully prepared. Before preparing the composite, the inexpensive lab-made SiCw was first modified by an oxidation/leaching process and then coated with Al₂O₃. The kinetics results indicate that the oxidation process can be described by improved shrinking-cylinder models. The aspect ratio of SiCw improved after modification. Subsequently, raw materials with a SiC–SiO₂–Al₂O₃ triple-layered structure were obtained after the Al₂O₃-coating process and used as feedstocks during the subsequent hot-pressing sintering. Finally, the characterization of the composites indicates that the mullite-bonded sample performs better (relative density of 93.8?±?1.4%, flexural strength of 533.3?±?18.2?MPa, fracture toughness of 13.6?±?2.1?MPa?m^1/2, and Vickers hardness of 20.6?±?2.5?GPa) than the reference sample without the mullite interface. The improved toughness could essentially be attributed to the moderately strong interface bonding and effective load transfer effects of the mullite interface.     

Seeing is believing? When scanning electron microscopy (SEM) meets clinical dentistry: The replica technique.

In restorative dentistry, the in situ replication of intra‐oral situations, is based on a non‐invasive and non‐destructive scanning electron microscopy (SEM) evaluation method. The technique is suitable for investigation restorative materials and dental hard‐ and soft‐tissues, and its interfaces. Surface characteristics, integrity of interfaces (margins), or fracture analysis (chipping, cracks, etc.) with reliable resolution and under high magnification (from ×50 to ×5,000). Overall the current study aims to share detailed and reproducible information about the replica technique. Specific goals are: (a) to describe detailed each step involved in producing a replica of an intra‐oral situation, (b) to validate an integrated workflow based on a rational sequence from visual examination, to macrophotography and SEM analysis using the replica technique; (c) to present three clinical cases documented using the technique. A compilation of three clinical situations/cases were analyzed here by means the replica technique showing a wide range of possibilities that can be reached and explored with the described technique. This guidance document will contribute to a more accurate use of the replica technique and help researchers and clinicians to understand and identify issues related to restorative procedures under high magnification.     

A directional mutation operator for differential evolution algorithms

Differential evolution (DE) is widely studied in the past decade. In its mutation operator, the random variations are derived from the difference of two randomly selected different individuals. Difference vector plays an important role in evolution. It is observed that the best fitness found so far by DE cannot be improved in every generation. In this article, a directional mutation operator is proposed. It attempts to recognize good variation directions and increase the number of generations having fitness improvement. The idea is to construct a pool of difference vectors calculated when fitness is improved at a generation. The difference vector pool will guide the mutation search in the next generation once only. The directional mutation operator can be applied into any DE mutation strategy. The purpose is to speed up the convergence of DE and improve its performance. The proposed method is evaluated experimentally on CEC 2005 test set with dimension 30 and on CEC 2008 test set with dimensions 100 and 1000. It is demonstrated that the proposed method can result in a larger number of generations having fitness improvement than classic DE. It is combined with eleven DE algorithms as examples of how to combine with other algorithms. After its incorporation, the performance of most of these DE algorithms is significantly improved. Moreover, simulation results show that the directional mutation operator is helpful for balancing the exploration and exploitation capacity of the tested DE algorithms. Furthermore, the directional mutation operator modifications can save computational time compared to the original algorithms. The proposed approach is compared with the proximity based mutation operator as both are claimed to be applicable to any DE mutation strategy. The directional mutation operator is shown to be better than the proximity based mutation operator on the five variants in the DE family. Finally, the applications of two real world engineering optimization problems verify the usefulness of the proposed method.